Spray Nozzle Technology.

Overview:
Sewer jetter nozzle are custom drilled based on pump's flow and pressure specifications resulting in optimized equipment and superb cleaning performance.

Sewer jetter nozzle perform the tough job of dislodging blockages in a drain or sewer pipe. Attached to the end of a hose, these Sewer jetter nozzle are fed into the drain where they blow the debris down the pipe where it can be removed.

Similarly, Tube Cleaning Nozzles are used to remove deposit build-up, such as soot and scale.

Mayur Engineering offers a variety of  sewer jetting nozzles that are designed to perform many different tasks. In addition to the nozzles displayed on this page,

Mayur Engineering is able to source other nozzles that may be needed.
Mayur Engineering offers a wide range of local and imported tube, drain and sewer cleaning nozzles.

Our sewer cleaning and jetting nozzles are made from the highest quality materials and are engineered to be most effective sewer cleaning products for the municipal and contractor market.

All of our products are made from high-quality, durable materials and are built to last.


Connection: 1/8'', 1/4'', 3/8'', 1/2'', 3/4'', 1’’ bsp and female threaded
Material : 304 Stainless steel, 316 Stainless steel & EN8

Ideal for:

• sewer cleaning
• drain cleaning
• pipe cleaning
• tube cleaning, and more.

Overview:

Spoon type spray nozzles feature a very high impact flat spray pattern with narrow spray angle. They produce a uniform spray distribution of medium-sizes drops. The flat jet spray pattern has sharply defined edges. Flat, high impact, sharply defined spray pattern without heavy edges. This type of high velocity spray is excellent for cleaning applications. Spray angles of 15, 25, 40, 50, 65, 80, 95 and 110 degrees are available.

Features:
High impact spray, high cooling performance and energy-saving mist cooling nozzle.
Large turn-down ratio of 1: 20 and minimal variation in spray angle.
Large free passage diameter for minimal clogging.

Design: One Piece design
Connection: 1/8'', 1/4'', 3/8'', 1/2'', 3/4'' bsp and threaded
Spray angle:  15°-50°
Flow Rate and spray angle make as per customer's requirements
Pressure: 1-7bar

Materials:
These nozzles are available in SS & brass.
Special materials and connections on requirements

Ideal for:

• Slab continuous casting
• Bloom continuous casting
• Billet casting
• Cooling for continuous casting rollers
• Cooling for hot mill rollers
• Continuous annealing equipment
• Washing, degreasing

Note: As per customers Requirement.

Overview:

A complete range of wide angel spray nozzles are shown here. These nozzles produce typically strong impact values, since the jet energy is concentrated over a limited Surface. Different techniques are available to produce a flat spray, each offers a specific design and spray properties Making it possible to choose the nozzle meeting all or most requirements for a given case. For each nozzle we show the most required construction materials but, for all other nozzles, special materials for given applications are often available or can be quoted. Because of the flat jet shape and it’s relatively High impact value. Wide angle flat fan spray nozzles produce a wide, low impact spray.

The circular orifice is relatively resistant to clogging. The deflector surface is machined to align precisely with the nozzle orifice to produce a high quality spray pattern. The orientation of the spray pattern relative to the nozzle pipe connection axis provides extra wide spray coverage at minimal spray stand-off distances.

Wide angel spray nozzles are having strong fluid impact. The energy of the jet is concentrated over a small surface area. Because of the flat jet shape and its relatively high impact values these nozzles are commonly used to wash objects moving on conveyors in a transverse direction to the pipe the nozzles are assembled to a flat jet spraying system involve large of relatively large number of nozzles on to one or more manifolds

Design: One-piece design
Connection: 1/8'', 1/4'', 3/8'', 1/2'', 3/4'' bsp and threaded
Flow Rate and spray angle make as per customer's requirements
Pressure:  1-7bar
Materials - These nozzles are available in SS & brass.
Special materials and connections on requirements

Ideal for:

• Slab continuous casting
• Bloom continuous casting
• Billet casting
• Cooling for continuous casting rollers
• Cooling for hot mill rollers
• Continuous annealing equipment
• Washing, degreasing

Note: As per customers Requirement.

Overview:

Connection: M 1/4, BSPT, Male
Pattern: Straight Solid Stream/ Needle Jet
Passive Orifice: 1.00 mm.
Material: 304 Stainless Steel, 316L Stainless Steel, Brass
Special materials and connections on request.

Flow Rate: 0.85 LPM 3 Bars
Pressure Rating: 10-60 Bars
Operation Rating: 15-30 Bars.

Liquid Type: Fresh Water/Deep well Water
Temperature Shocking: Up to 125 Degree C

Ideal for:

• High Pressure Needle Nozzle
• Basic Style
• High pressure swing cleaning of long net part
• High pressure swing cleaning of squeezing part
• Cleaning of blind whole roller
• Cleaning of groove